Viensienas dūmvadi
Stainless steel locking band INOX d. 180
The indicated price is valid ordering till 16.02.2026.
Please contact us on +371 28339922 to check if the item is in stock before making a purchase. Just because the indication is available does not guarantee that the item is available immediately.
Description
The INOX Locking Clamp represents the necessary element to tighten each intercog joint and create the continuity of a Chimney System. In combination with the triple-lip silicone gasket, they guarantee the tightness of the system, according to the provisions of the UNI EN 1856-1 standard.
Characteristics
• Material Used: STAINLESS STEEL 304 BA (EN 1.4301 - L20).
• To ensure tightening and tightness of each joint, the section has an asymmetrical geometry. During assembly, the wider lower diameter must be housed on the female cup; the narrower upper diameter must be arranged at the male cup.
Applications
• Clamping element of each graft.
• Operation: dry (D) or wet (W)
• Pressures: Positive for P1 = 200 Pa; Negative for N1 = 40 Pa.
• Operating Temperature: Max 200°C with silicone gasket and P1 200 Pa; Max 600°C without silicone gasket and N1 40 Pa.
