Additional elements for wood boilers
Control Panel DK System Control
The indicated price is valid ordering till 31.01.2026.
Please contact us on +371 28339922 to check if the item is in stock before making a purchase. Just because the indication is available does not guarantee that the item is available immediately.
The CONTROL control panel is designed to work with selected DK System controllers. Regulators cooperating with the CONTROL panel: Unister, Ekoster 200, Ekoster 430.
Attention:
To connect the controller to the control panel, use only the cable provided by the manufacturer. The use of other cables and any interference with the original cable may cause reading errors and damage to electronic components; in such situations, the total cost of repair and transport shall be borne by the user.
The CONTROL panel does not work with DK System controllers with the RS extension.
The device has the following functions:
permanent indication of the measured temperature
signals the operation of the central heating pump
sound signal that informs about exceeding the temperature
possibility to change the desired temperature remotely
signaling of other parameters depending on the regulator with which the panel is currently working
Communication cable included (10 m)
Alarm about sensor failure or exceeding the permissible temperature
CONTROL PANEL
Display temperature range from -9 °C to + 99 °C
Sound signal temperature setting range from + 50 °C to + 99 °C
Nominal supply voltage 8 - 12 V
Relative humidity < 95%
Housing protection degree IP40
Insulation class II
Regulator dimensions 106 x 65 x 20 mm
Ambient temperature from 0 °C to + 40 °C
Distance between mounting holes 60 mm
