Atmos

The wood gasification boiler is designed to burn wood using the principle of gas generation and the use of a draft fan, which extracts combustion products from the boiler, or the use of a suction fan, which pumps air into the boiler.

Boiler casings are made of welded construction of high-quality sheet steel 3-8 mm thick. The heating boiler consists of two chambers, which are installed one above the other, where the upper one serves as a reservoir for fuel, and the lower part is equipped with a heat-resistant short pipe opening, where combustion and gas products are discharged.

The upper part of the channel intended for combustion products is equipped with an outlet short pipe designed to be connected to the flue.

The boiler consists of two chambers that are placed one above the other. The upper chamber is intended for placing fuel, the lower chamber is used for combustion and there is an ash compartment. Between the two chambers there is a nozzle for complete gasification and combustion of wood.

Advantages of ATMOS wood gasification boilers:

• Ability to burn large pieces of wood;
• Large reservoir for fuel - long burning time;
• High COP- 81 - 90%, depending on the type - primary and secondary air are preheated to a high temperature;
• Ecological burning - boiler according to CSN EN 303-5 refers to class 3;
• Draft fan - ensures suction of fine ash, prevents smoke from escaping into the boiler house;
• Cooling circuit to prevent overheating - prevents the risk of damage to the boiler;
• Automatic shutdown of the boiler after burning out the fuel - thermostat for flue gases;
• Convenient ash collection - there is a large ceramic combustion chamber for ash (when burning wood - it must be removed once a week, for coal - once a day);
• Boiler without tube plate - cleaning is easier;
• Small size and light weight;
• High quality.

Power, kW:
DC18S - 20
DC22S - 22
DC25S - 27
DC30SX - 30
DC32S - 35
DC40SX - 40
DC50S - 49,9
DC70S - 70
DC100 - 99
DC105S - 105
DC150S - 150

Information

Manual